Maytag Appliance Repair Edmonton

We Repair Maytag Appliances The Right Way in Edmonton

Maytag Appliance Repair Team
Maytag appliance repair Edmonton
Maytag appliance repair Edmonton

Finding the right repair expert for your Maytag Appliance in Edmonton can be a daunting task.

At GoTech Appliance Repair, we specialize in repairing Maytag appliances. Our team is well-equipped and experienced to efficiently complete any necessary repairs.

Our technicians are all fully licensed and certified journeyman, who have undergone three years of education at SAIT to gain the expertise required to repair all major Maytag appliances.

We arrive equipped with the necessary tools and replacement parts to complete any required repairs during our first visit. If a part needs to be ordered, we won’t charge for a second visit.

Our objective is not only to resolve the issue but also to prolong the lifespan of your appliance, ensuring that you don’t have to search for a replacement.

When you contact us, our expert will arrive promptly and fully prepared. 

It’s natural to feel apprehensive about leaving your household appliances in someone else’s care. However, if you contact GoTech Appliance Repair for Maytag repair services, you can be confident that your appliances will be treated with the utmost care and consideration for your budget. Our team is dedicated to resolving any problems and extending the life of your appliances through diligent and attentive work.

Take a look at this video showcasing our technicians during a service call. It provides an idea of what you can anticipate from GoTech Appliance Repair in Edmonton.

GoTech Appliance Repairs – Edmonton 

Maytag Appliance Repair Service

Edmonton (780) 994-4333

Maytag Appliance Repair Edmonton

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Sherwood Park, St. Albert, Surrounding Areas 

Maytag Fridge Repair Edmonton

Maytag Fridge Repair

One of the most common issues with Maytag refrigerators is inadequate cooling. There are several potential causes for this problem, including failure of the condenser fan motor or evaporator fan motor, a faulty start relay, malfunctioning temperature control thermostat or board, dirty condenser coils, or compressor or thermistor failure. Given the variety of potential causes, repairing or replacing a refrigerator should be entrusted to skilled and well-equipped technicians.

Maytag Fridge Repair

For pricing and to learn more about booking a fridge repair appointment, please follow this link: –> Maytag Fridge Repairs

Please continue reading below for information regarding the error code on your Maytag Refrigerator.

Maytag Stove and Oven Repair Edmonton

Maytag Stove Repair

If you enjoy cooking from the comfort of your own home, having a functioning oven is essential. It’s common knowledge that over time, certain parts of your oven may need to be replaced. It’s unsafe to attempt to repair your oven on your own. That’s where we come in! If you’re experiencing issues with your oven, give us a call and we’ll take care of it for you. We service all areas in and around Edmonton. Some common problems we fix include defective igniters, blown thermal fuses, loose wire connections, failed relay boards or safety valves, and broken temperature control thermostats. Maytag Appliance Repair in Edmonton will remove any defective parts and provide long-lasting repair services. Our well-equipped team guarantees top-notch services at reasonable prices. You’ll be glad you called us!

For pricing and to learn more about booking an Oven – Stove Repair appointment, please follow this link: –> Maytag Oven – Stove Repairs

Please continue reading below for information regarding the error code on your Maytag Oven and Stove.

Maytag Dishwasher Repair Edmonton

Dishwasher Repair Maytag

At Maytag, we are known for our high-quality dishwashers equipped with powerful motors and durable stainless steel interiors. Our motors can effectively remove grime and restore the appearance of your dishes. However, to ensure that your dishwasher continues to operate smoothly, it requires regular repair and maintenance. Luckily, we provide a comprehensive range of services, such as repair, maintenance, and replacement options, to extend the lifespan of your dishwasher. For your convenience, we have included links and information below to help you schedule a technician or troubleshoot any error codes.

Dishwasher Repair Maytag

For pricing and to learn more about booking a Dishwasher Repair appointment, please follow this link: –> Maytag Dishwasher Repairs

Please continue reading below for information regarding the error code on your Maytag Dishwasher.

GoTech Appliance Repairs – Edmonton 

Maytag Appliance Repair Service

Edmonton (780) 994-4333

Maytag Appliance Repair Edmonton

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Sherwood Park, St. Albert, Surrounding Areas 

Maytag Dryer Repair Edmonton

Maytag Dryer Repair

When paired with a washing machine, a dryer can be a great appliance. However, if your dryer isn’t functioning properly – whether it’s not heating up, getting too hot, or not tumbling – it’s time to seek help from GoTech Appliance Repairs. Using a malfunctioning dryer can actually damage your clothing, so it’s important to stop using it as soon as you notice an issue. Our team is skilled in repairing both gas and electric dryers, and we have all the necessary parts for Maytag dryer models.

Maytag Dryer Repair

For pricing and to learn more about booking a Dryer Repair appointment, please follow this link: –> Maytag Dryer Repairs

Please continue reading below for information regarding the error code on your Maytag Dryer.

Maytag Washing Machine Repair Edmonton

Maytag Washer Repair

A washing machine has become an essential household appliance in today’s world. If your washer is making too much noise, not starting, leaking water, or emitting a bad odor, it’s time to get professional assistance. There could be several reasons why your washer is not working correctly, such as a loose or broken drive belt, outdated door latch, faulty motor control board, torn clutch, damaged drive pulley, defective drive motor or basket drive, or a defective water transition. At GoTech Appliance Repairs, we have the expertise and certified spare parts needed to fix the issues with Maytag Neptune, Atlantis, and Appliances washing machines.

For pricing and to learn more about booking a Washing Machine Repair appointment, please follow this link: –> Maytag Washing Machine Repairs

Please continue reading below for information regarding the error code on your Maytag Washing Machine.

You're welcome to check our Google Reviews

GoTech Appliance Repairs – Edmonton 

Maytag Appliance Repair Service

Edmonton (780) 994-4333

Maytag Appliance Repair Edmonton

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Sherwood Park, St. Albert, Surrounding Areas 

Fault Codes Maytag® EPIC z™ Appliance

Fault Codes Maytag® EPIC z™ Appliance

Fault codes usually indicate a specific problem. However, in many cases, a faulty timer (ERC or Electronic Range Control) can result in an incorrect fault code. Our team of technicians is experienced in repairing most timers and we know how to get to the bottom of any Maytag issue. Review the Maytag fault codes below to stay on top of any issue that may arise.

F0 – Stuck function key

  • Replace the touchpad or if touchpad is part of the clock, replace the clock (ERC).

F1 – Touchpad or clock (ERC) defect

  • Replace the touchpad or clock (ERC). The touchpad is a more common problem. Refer to F1 test at the top of this page for further information.

F2 – Oven temperature too hot

  • Replace the relay board, if present, or the oven temperature sensor (RTD). Check sensor harness.

F3 or F4 – Shorted or open oven temperature sensor (RTD)

  • Check the sensor harness and harness connection between the oven sensor and oven control. Replace the oven temperature sensor (RTD) if the wiring is ok.

F5 – Watchdog and hardware conflict

  • Replace the clock (ERC).

F7 – Function key stuck or shorted

  • Replace the touchpad or if the touchpad is part of the clock, replace the clock (ERC).

F8 – Analog / Digital problem

  • Replace the clock (ERC).

F9 – Door latch

  • Check the door latch components.

Maytag® EPIC z™ Neptune, Atlantis, Dryer Fault Codes

PFPower Failure
Power failure while the dryer was in cycle. Press the Stop button to clear the display. If you experience common power failures on your dryer be sure to check the electrical outlet cord.
Part to replace – Outlet Cord

 F01Main Electronic Control Board Fail
Remove the dryer from power for 10 minutes. Apply power back to the dryer and if the code returns you need to replace the main electronic control board.
Part to replace – Main Electronic Control Board

F02Keypad or User Interface Fail
A button on the keypad may be stuck on one of the user interface controls. If the button cannot be unstuck then replace the user interface control assembly.
Part to replace – User Interface Control Assembly

F22Exhaust Thermistor (Temp Sensor) Fail
Remove power from the dryer. Use a multi-meter and check the resistance of the thermistor (0,000 ohms). If the thermistor is bad then replace it.
Part to replace – Thermistor (Temp Sensor)

F23Exhaust Thermistor (Temp Sensor) Fail
Remove power from the dryer. Use a multi-meter and check the resistance of the thermistor (0,000 ohms). If the thermistor is bad then replace it.
Part to replace – Thermistor (Temp Sensor)

F26Drive Motor Fail
Remove power from the dryer. Check wiring connections between the main electronic control board and the drive motor. If the wiring connections are not damaged and connected then replace the drive motor.
Part to replace – Drive Motor

F28Moisture Sensor Fail
Remove power from the dryer. Check the wiring harness on the moisture sensor visually and with a multi-meter. If the wiring connections are okay then replace the moisture sensor.
Part to replace – Moisture Sensor

 F29Moisture Sensor Fail
Remove power from the dryer. Check the wiring harness on the moisture sensor visually and with a multi-meter. If the wiring connections are okay then replace the moisture sensor.
Part to replace – Moisture Sensor

Maytag® EPIC z™ Neptune, Atlantis, Washer Fault Codes

Maytag-Washer-Error-Codes

nd – The water level fails to drop below the Low Water level reset within 15 minutes, before a spin begins. 

LODoor failed to unlock after 3 attempts. 

nF – Continuous fill of 12minutes. Total fill of 14minutes. 

FL – Door failed to lock after3 attempts. 

LE Water sensor level fault. 8
OE A fault is detected in the water level sensor. Data (frequency) shows the water level is at or above the overflow level.

E-E2 – Detected a key pressed more than 30seconds, the key will be assumed to be stuck. 

dc – Never exceeded 400rpm due to an unbalanced load. 

od The door has not been opened after two complete wash cycles. Door switch was not seen open since the last two final spins. 

dL – Open door lock switch with motor running. 

dS – Door switch is read as open and the door locked switch is read as locked. 

bE – Motor tach signal exists without motor running. 

tEAbnormal high/low temp or ohm resistance seen. 

E3 – Machine control is attempting to drive the motor but is not seeing any tach response. Visual check shows motor is not moving. (Locked, Hall Sensor fault) 
Sr – System Relay failure. 

HrHeater Relay failure. 

Fridge Error Codes

1-1Stuck relay on the electronic control board

1-2All the LED’s are on because the user interface control is incompatible with the electronic control board

2-1Stuck button on the user interface control

2-2User interface control can’t communicate, with electronic control board,

3-1Thermistor/OWI sensor failure (The thermistor is the water temperature sensor, the OWI sensor is the Optical Water Indicator that detects the amount of debris in the water.)

3-2Shorted thermistor/OWI sensor.

3-3OWI failed to calibrate or the drain hose check valve failed, allowing dirty water to backflow into the dishwasher

4-3Communication error between the electronic control board and the circulation pump motor

5-1Door switch failure

Fridge Error Codes

5-2Control detects door not opening

6-1Won’t fill

6-2Water inlet valve failure

6-3Suds or air are in the water pump

6-4The float switch is open

6-6Incoming water is too cold 

6-7Disconnected or damaged flow meter

6-8Problem with water softener regeneration valve (Water Softener Models Only),

7-1Heating element doesn’t work 

7-2Heating element won’t shut off

8-1Slow drain

8-2Drain pump electrical problem

8-3Drain pump stuck on

10-1Detergent dispenser failure

Recent Customer Reviews

 by Fridge Repair on Appliance Repair Edmonton
Absolutely Impressed

I am absolutely impressed with GoTech Appliance Repair! Our fridge started making a strange noise, and their technician was at our door the very next day. He was knowledgeable, friendly, and explained everything clearly. The repair was quick, and the price was fair. It's refreshing to see such professional and courteous service. I highly recommend them for anyone in Edmonton needing appliance repairs!

 by Paulette on Appliance Repair Edmonton
Fridge repair

I rarely write reviews, but GoTech Appliance Repair truly deserves a shout-out. After my oven broke down right before a big family dinner, I was in a panic. I called GoTech, and not only did they schedule me on the same day, but the technician also went above and beyond to ensure my oven was fixed in time. The service was top-notch, and the dedication to customer satisfaction was clear. They saved the day!

 by Justine on Appliance Repair Edmonton
Right to Repair!

My Dacor oven was not heating properly. The baking element was not working. So, I went through numerous Youtube videos and repairs guides thinking it could be a quick fix. I tried the two easy fixes that I was capable of, but they did not work and I knew I needed a professional! I get right irritated when I am told the part I need is discontinued or the repairman does my same YouTube fixes and states "there is nothing more I can do, you need to buy a new appliance". Not so at GoTech! John is an electrician by trade so he can "see" your appliance differently, he spotted a short on my motherboard, whipped out a small replacement part, soldered it on, and "Viola" my oven works! Now John explained in great detail that yes the motherboard in my oven is discontinued, and he cannot guarantee his electrician genius will do the trick, but the cost of him giving it a try far outweighed me buying a new oven. Besides being a smart technician, problem-solving above and beyond what he needed to do, he is a wonderful human being and a great conversationalist! I took many business cards to hand out to friends!

Service on Maytag refrigerator

Diagnosis and replacement of the defective part was done quickly. Repairman was at my house within 24 hours, arrived on time, and repairs were finished in about an hour.

 by Tracy on Appliance Repair Edmonton
Great service

I was able to book a same day appointment, the technician (John) was very professional and explained the repair and costs in detail. They had the repair part and my appliance was fixed that day. Quick, and professional service, thank you so much.

Page 1 of 11:
«
 
 
1
2
3
 
»
 

Best Edmonton Maytag Appliance Repair Experts

Author: Yevgen Z